Professor, Department of Mechanical Engineering (ME)
Bachelor of Science in Engineering (Mechanical)
Bangladesh University of Engineering and Technology, 1983
Master of Science in Engineering (Mechanical)
Bangladesh University of Engineering and Technology, 1985
Doctor of Philosophy, DIC
Imperial College, London,1990
PG Cert in Higher Education
Northumbria University, 2012
AREAS OF EXPERTISE
Applicationsof Computational Fluid Dynamics for industrial applcations
Experimental and Numerical Heat Transfer including nano-fluids
Life cycle assessment of energy systems
Institute of Engineers, Bangladesh
Higher Education Academy, UK
Institute of Mechanical Engineers (IMechE)
American Society of Mechanical Engineers (ASME)
ME403: Power Plant Engineering
ME307: Heat Transfer Equipment Design
ME305 & ME 205: Heat and Mass Transfer
ME6145: Advanced Convection Heat Transfer
ME6155: Enhancement of Heat Transfer
Experience of academic supervision
Supervised 6 PhD, 30 MSc and 100+ undergraduate final year individual thesis
Heat transfer: Experimental and numerical
Life cycle assessment of renewable energy system
Pedagogy: Quality assurance in higher education; Engineering Ethics
Iyi, D., Hasan R. and Penlington R. (2018) Experimental and Numerical Study of Buoyancy-driven Low Turbulence flow in Rectangular Enclosure Partially Filled with Isolated Solid Blockages. International Journal of Heat and Mass Transfer, 127, pp. 534-545.https://doi.org/10.1016/j.ijheatmasstransfer.2018.07.031
Etaig, S., Hasan, R. and Perera, N. (2018) A new effective viscosity model for nano-fluids. Int. J of Numerical Methods on Heat and Fluid Flow, (3), pp.571-583, https://doi.org/10.1108/HFF-11-2016-0462
Haitem, Fargani., Cheung, Wai Ming and Hasan, R. (2018) Ranking of factors that underlay the drivers of Sustainable Manufacturing based on their variation in a sample population. Int. J. Manufacturing Technology and Management, 32(3), pp. 297. DOI: 10.1504/IJMTM.2018.091762
Ozoemena, M., Cheung, W. M. and Hasan, R. (2018) Improving the uncertainty analysis of embodied energy and embodied carbon in wind turbine design. The International Journal of Advanced Manufacturing Technology. 94 (5-8), doi: 10.1007/s00170-016-9972-7pp. 1565-1577. ISSN 0268-3768, ISSN 0268-3768
Ozoemena M., Hasan R., Cheung W. M. (2016) Analysis of Technology Improvement Opportunities for a 1.5 MW Wind Turbine using a Hybrid Stochastic Approach in Life Cycle Assessment, Renewable Energy, Vol. 93 pp. 369-382. DOI: 10.1016/j.renene.2016.03.012.
Iyi, D., Hasan R. and Penlington R. (2015) Effect of emissivity on heat and mass transfer of humid air in a cavity filled with solid obstacles, Numerical Heat Transfer, Part A: Application, Vol. 67(5), pp. 531-546. DOI: 10.1080/10407782.2014.937261.
Iyi, D., Hasan R., Penlington R. and Underwood, C. (2014) Double skin façade: modelling technique and influence of venetian blinds on the airflow and heat transfer, Applied Thermal Engineering, Vol. 71, pp. 219-229. DOI: 10.1016/j.applthermaleng.2014.06.024
Hasan R. and Puthukkudi A. (2013) Numerical study of effusion cooling on an adiabatic flat plate, J. Propulsion and Power Research, Vol. 2(4), pp. 269-275. DOI: 10.1016/j.jppr.2013.11.002.
Danaher S., Dudziak T., Datta P., Hasan R. and Leung P. (2013) Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling, Corrosion Science, Vol. 69, pp.322-337. DOI: 10.1016/j.corsci.2012.12.016
Etaig, S., Hasan, R. and Perera, N. (2017) Flow Characteristics and Heat Transfer Performance of Magnesium Oxide-Water Nanofluid in the Entrance Region in Circular Cross Section Microchannel, ICHMT Int. Symp. on Advances in Computational Heat Transfer, May, 28-31, Napoli, Italy
Fargani, Haitem, Cheung, Wai Ming and Hasan, R. (2017) A Proposed Implementation Process for a Sustainable Manufacturing Framework. Proceedings of the 17th International Conference on Manufacturing Research (ICMR). Greenwich University
Etaig, S., Hasan, R. and Perera, N. (2016) Investigation of a new effective viscosity model for nano-fluids, Int. Conf. on Heat & Mass Transfer, 23-26 May, Cracow, Poland.
Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2016) Analytical and Numerical Modelling of Spent Fuel Cooling Ponds.In: 2nd International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul, Turkey.
Ramadan, A., Hasan, R. & Penlington, R. (2016) Modelling of heat transfer from water Surface undergoing free evaporation, IX nt. Conf. on Heat & Mass Transfer, 23-26 May, Cracow, Poland.
Ozoemena, M., Cheung, W. M., Hasan, R. and Fargani, H. (2016) A hybrid stochastic approach for improving LCA uncertainty analysis in the design and development of a wind turbine, 9th Int. Conf. on Digital Enterprise Technology – DET 2016, 29-31 March, Nanjing, China.
Fargani, H., Cheung, W. M. and Hasan, R. (2016) An empirical analysis of the factors that support the drivers of sustainable manufacturing, 9th Int. Conf. on Digital Enterprise Technology – DET 2016, 29-31 March, Nanjing, China.
Etaig S., Hasan R. and Perera N. (2015) Numerical study of the effect of inclination angle on heat transfer performance in backward facing step utilizing nanofluid, UK Heat Transfer Conference, Edinburgh, 7-8 September, 2015
Ramadan, R., Hasan R. and Penlington R. (2015) Numerical simulation of flow and heat transfer around vertical cylinder submerged in water. UK Heat Transfer Conference, Edinburgh, 7-8 September, 2015.
Bowes A. and Hasan R. (2015) A computational analysis of flow and acoustics around a car wing mirror: Proceedings of The World Congress on Engineering 2015, WCE 2015, 1-3 July, 2015, London, U.K., pp 1052-1057.
Hasan R. and Ramadan A. (2015) Modelling of flow and heat transfer in spent nuclear fuel cooling ponds, Paper ID: 612, 11th Int. Conf. on Mechanical Engineering, BUET, Dhaka, Bangladesh, 18-20 December, 2015
Hasan R. Tudor J. and Ramadan A. (2015) Modelling of flow and heat transfer in spent fuel cooling ponds, Proceedings of International Congress on Advances in Nuclear Power Plants, ICAPP, May 3-5, 2015, Nice, France.
Iyi, D., Hasan R. (2014) Natural convection flow and heat transfer in an enclosure containing staggered arrangement of blockages. Proceedings of 6th BSME Conference (ICTE 2014), Dec. 20-22, Islamic University of Technology, Dhaka, Bangladesh
Ibude, I., Hasan, R., Faregani, H., Ozoemena, M., Cheung, W M. (2014) Sustainability analysis of Palm oil vs. Jatropha. Proc. of the 12th International Conference on Manufacturing Research, 9-11 September, 2014, Southampton Solent University, U.K.
Fargani, H., Cheung, W. M., Hasan, R. & Birkett, M. (2014) An integrated approach incorporating lean six sigma and life cycle assessment to support sustainable manufacturing. Proceedings of the 12th International Conference on Manufacturing Research (ICMR).Southampton Solent University.
Hasan R., Baddage S., Perera N. and Persson M. (2013) A novel methodology to ascertain the heating mechanism of steel wire during annealing in a tube furnace. Proc. of the 11th International Conference on Manufacturing Research, 19-20 September, Cranfiled University, U.K.
Ozoemena M., Cheung, W M., Hasan R. and Hackney P. (2013) A review of Life cycle assessment of renewable energy systems. Proc. of the 11th International Conference on Manufacturing Research, 19-20 September, Cranfiled University, U.K
Robinson P., Hasan R. and Tudor J. (2013) Numerical simulation of flow and heat transfer in spent fuel cooling ponds. Lecture Notes in Engineering and Computer Science: Proceedings of the World Congress on Engineering, 3-5 July, 2013, London, pp. 1861-1864.
Iyi, D., Hasan, R and Penlington, R. (2012) Interaction effects between surface radiation and double diffusive turbulent natural convection in an enclosed cavity filled with solid obstacles. Proc. International Symposium on Advances in Computational Heat Transfer, CHT-12, July 1-6, University of Bath, England
Hasan, R., Perera, N., Baddage, S. and Persson, M. (2012) Numerical modelling of heat transfer in a tube furnace for steel wire annealing. Proc. International Manufacturing Conference, IMC29, August 29-30, University of Ulster, Ireland.
Hasan, R. (2012) Identification of generic errors for effective formative feedback in energy studies thematic area of Mechanical Engineering. Proc. EE2012, Innovation, Practice and research in Engineering Education, Sept. 18-20, University of Coventry, UK.
Hasan, R. (2012) Teaching ethics to engineering undergraduates – lessons learned and a guide for lecturers: perspective from an English University. Proc. EE2012, Innovation, Practice and research in Engineering Education, September 18-20, University of Coventry, UK.
Iyi, D., Hasan, R and Penlington, R. (2011) Numerical analysis of the influence of thermal boundary condition and surface emissivity on the flow and heat transfer in turbulent buoyancy driven flow. The Asian Symposium on Computational Heat Transfer and Fluid Flow, Septemeber 2011, Kyoto, Japan.
Hasan R. G. M., Penlington R., (2010) Addressing diversity at module level, Presented at the 3rd Regional Learning & Teaching conference, March, Sunderland University, UK
AFFILIATION WITH INDUSTRIES
Sellafield Ltd.: Heat and mass transfer in spent nuclear fuel cooling pond
SNA Europe: Heat transfer in annealing rig
AVID Technologies: Design optimization of pumps for zero-emission vehicles
Dr. R. G. M. Hasan
ProfessorDepartment of Mechanical Engineering (ME) email@example.com